IEC 61754-19 pdf download – Fibre optic connector interfaces – Part 19: Type SG connector family

admin
IEC 61754-19 pdf download – Fibre optic connector interfaces – Part 19: Type SG connector family

IEC 61754-19 pdf download – Fibre optic connector interfaces – Part 19: Type SG connector family
1 Scope
This part of lEC 61754 defines the standard interface dimensions for the type SG family ofconnectors.
2Description
The parent connector for the type sG connector family is a single position plug of plug/socketconnector set configuration.The plug is characterized by duplex cantilevered optical fibreslocated within the plug interior. Plug optical fibres flex to mate with socket optical fibre ends.Mating socket optical fibres are positioned and aligned by integral V-grooves. Socket V-grooves capture, guide,and align the plug optical fibres during connector set engagement.The spring-release latch limits plug penetration into the socket; it is also a single position keypreventing inverted assembly.Contaminant entry is restricted by an integral plug cover andsocket door. Each is normally closed when de-mated, but self-actuate to open position forsingle-action connector set engagement.
3Interfaces
The following figures and tables define the standard interfaces for the type sG connectorfamily.The standard interfaces contained in this standard are listed in the following:
61754-19-1: duplex plug connector interface – 8 ° contact angle
61754-19-2 : duplex socket connector interface – 8° contact angleThe following connectors are intermateable:
61754-19-1 mates with 61754-19-2.