BS IEC 60092-306 pdf download – Electrical installations in ships — Part 306: Equipment – Luminaires and lighting accessories

admin
BS IEC 60092-306 pdf download – Electrical installations in ships — Part 306: Equipment – Luminaires and lighting accessories

BS IEC 60092-306 pdf download – Electrical installations in ships — Part 306: Equipment – Luminaires and lighting accessories
This International Standard applies to luminaires and lighting accessories for use in ships.ltapplies primarily to luminaires for illumination purposes.
NOTE Boats,submarines (except naval submarines), watercraft and floating equipment are ships to which thisstandard applies.
This standard also applies to lighting accessories associated with the wiring and currentconsuming appliance of an installation.
This standard does not apply to portable luminaires, navigation lights,search lights, daylightsignalling lamps,signal lights including the relevant control and monitoring equipment andother lights used for navigation in channels, harbours, etc.
For navigation lights, see EN 14744, for search lights, see lSO 17884, for daylight signallinglamps, see lso 25861.
Normative references
The following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.
IEC 60068-2-1,Environmental testing – Part 2-1 : Tests – Test A: ColdIEC 60068-2-2,Environmental testing – Part 2-2: Tests – Test B: Dry heat
IEC 60068-2-6,Environmental testing – Part 2-6:Tests – Test Fc: Vibration (sinusoidal)IEC 60068-2-27,Environmental testing – Part 2-27:Tests – Test Ea and guidance: ShocklEC 60068-2-52,Environmental testing- Part 2-52:Tests – Test Kb: Salt mist, cyclic (sodium,chloride solution)
IEC 60068-2-78,Environmental testing – Part 2-78: Tests – Test Cab: Damp heat,steadystate
lEC 6o079(all parts),Equipment for explosive atmospheres
IEC 60092-101,Electrical installations in ships – Part 101: Definitions and generalrequirements
IEC 60092-201:1994,Electrical installations in ships – Part 201: System design – GenerallEC 60092-352,Electrical installations in ships – Part 352:Choice and installation of electricalcables
lEC 60155,Glow-starters for fluorescent lampsIEC 60238,Edison screw lampholders
IEC 60332-1-2:2004,Tests on electric and optical fibre cables under fire conditions – Part 1-2:Test for vertical flame propagation for a single insulated wire or cable – Procedure for i kwpre-mixed flame
IEC 60400,Lampholders for tubular fluorescent lamps and starterholdersIEC 60529,Degrees of protection provided by enclosures (IP Code)
IEC 60533,Electrical and electronic instalations in ships – Electromagnetic compatibilityIEC 60598-1,Luminaires – Part 1 : General requirements and tests
IEc 60684-2,Flexible insulating sleeving – Part 2: Methods of test
IEC/TR 60721-4-6,Classification of environmental conditions – Part 4-6:Guidance for thecorrelation and transformation of environmental condition classes of IEC 60721-3 to theenvironmental fests of lEC 60o68 – Ship environment
IEC 60695-2-11,Fire hazard testing – Part 2-11: Glowing/hot-wire based lest methods -Glow-wire flammability test method for end-products
IEC 60754-1,Test on gases evolved during combustion of materials from cables – Part 1:Determination of the amount of halogen acid gas
IEC 60838-1,Miscellaneous lampholders – Part 1:General requirements and tests
IEC 60945,Maritime navigation and radiocommunication equipment and systems – Generalrequirements – Methods of testing and required test resuits
IEC 61184,Bayonet lampholders
IEC 61347-2-1,Lamp controlgear – Part 2-1:Particular requirements for starting devices(other than glow srarters)
IEC 61995-1,Devices for the connection of luminaires for household and similar purposes -Part 1:General requirements
IEC 61995-2,Devices for the connection of luminaires for household and similar purposes -Part 2: Standard sheets for DcL
IsO 2409,Paints and varnishes – Cross-cut test
ISO 3882,Metallic and other inorganic coatings – Review of methods of measurement ofthickness
ISO 4892-2,Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arcamps
ISO 4892-3,Plastics – Methods of exposure to laboratory light sources – Part 3: FluorescentuV lamps
iso 9001,Quality management systems – Requirements
ISO 17884,Ships and marine technology – Searchlights for high-speed craftISO 25861 Ships and marine technology – Navigation – Daylight signalling lamps
Defence Standard 02-713,Determination of the Toxicity Index of the Products of Combustionfrom Smal Specimens of Materials
EN 12206-1,Paints and varnishes – Coating of aluminium and aluminium alloys forarchitectural purposes – Part 1 : Coatings prepared from coating powder
EN 13032-1,Light and lighting – Measurement and presentation of photometric data of lampsand luminaires – Part 1 : Measurement and file format